Suitable for all drying, setting, baking and thermosoling processes.
Table model.
Sample size up to max. 36x42cmAutomatic pin frame transport with preselectable dwell times from 10 sec. to 6 min.
Electric heating 6 KW; temperature range 20° -250° C with air circulating fanSpecially-designed pin frame to hold all types of sample fabrics in length and/or width.
Suitable for discontinuous operation with padding mangle, type AIR PAD.
Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry.
Same Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature humidity, dwelling time, this apparatus can be used for:
- Drying, curing and thermo-fixation 20°- 250°C
- Steaming with saturated steam 102°C ± 2°C
- HT steaming at temperatures between 100°- 250°CTest fabric size max. 350x400mm
Automatic pin frame transport with preselectable dwell time from 10sec to 60min.
The ceiling is slanted and an additional heating is fixed at the entrance slit in order to avoid a formation of drop water.
Moisture controller with regulation 10-100%
Steam generator can be supplied on requestSuitable for discontinuous operation in conjunction with lab padder, type AIR PAD
Continuous type dryer for drying, curing and fixation of samples.
Floor model.
Can be used for:
- Continuous working with endless pin chain
- Batch working with pin frame
- Width of test samples
- Transport by endless pin chain 100-350mm
- Transport by pin frame 125-300mm
Electronic speed contol for dwell times from 20sec. to 7min
Electric heating 18KW; temperature 20°-250°C
High drying and thermosoling performance thanks to 3 sets of powerfui air circulating fans2 sets of full range temperature controllers
LABORATORY MINI OVEN is designed for combination with our laboratory AUTO COATING device. The material carrier for fabric is suitable for both machines; therefore, the coated material can be chemically treated without any re-pinning
- High-grade stainless steel construction.
- Sample size: 33 x 43 cm
- Temperature Control with accuracy of +/- 1%
- Automatic all function controller
- Temperature range: 20 to 250∘C
- Electrical heating system: 7.2 KW
- Automatic Curing/feeding time control: 10 to 360 seconds.
- Fan Control: 1/4 HP three phase motor with adjustable direction tuning
- Electricity: 380V x Three phase x 50Hz
- Dimension: (98.5+7 cm) L x (93 cm) W x (46+21cm) H
Index
For more informations, click here and fill the form...
List of products :
]